SkyTrak 6036 Operation Manual - Manual (Page 98)

Section 5 - Attachments
5-28 31200749
Truss Boom
Use Appropriate Truss Boom Attachment Capacity Chart
To determine maximum capacity, refer to “Telehandler/
Attachment/Fork Capacity” on page 5-3.
Suspend loads in accordance with requirements set forth in Section
1 - General Safety Practices.
The boom joystick (1) controls lift/lower and extend/retract movement of the boom.
The attachment tilt joystick (2) controls truss boom tilt.
• Move joystick back to tilt up.
• Move joystick forward to tilt down.
Winch Control (if equipped):
The auxiliary hydraulic joystick (3) controls the truss boom mounted winch.
• Move joystick right to raise cable.
• Move joystick left to lower cable.
OY0570
OH4051
2
1
3