Installing the airdog, Mounting brackets, On the truck’s frame, cont’d – PureFlow AirDog DF-200 - GM Duramax 2001-2010 User Manual
Page 10
10
PureFlow AirDog
AirDog
®
II
2001-2010 DuraMax Diesel
Section 4 AirDog
®
& Mounting Brackets
Installing the AirDog
®
& Mounting Brackets
on the Truck’s
Frame, cont’d!
NOTE: The AirDog
®
II can be mounted on the inside or the outside of the frame. Some bed and
cab configurations may only allow system to mount on the outside of the frame.
Driver’s Side
Frame Rail.
Figure 9
Figure 10
4-5.
Clamp the frame between the AirDogII bracket assembly and the backing plate using
the 3/8” x 4” bolts, lock washers, and nuts included in the kit as shown in figure 11.
Figure 11
4-6.
Position the AirDog® on the frame as necessary for clearance. Properly torque all
fasteners! The bracket is adjustable so be sure to adjust for clearance before tightening
brackets to frame.