PureFlow AirDog DF-200 - GM Duramax 2001-2010 - Manual (Page 13)

13
PureFlow AirDog
AirDog
®
II 2001-2010 DuraMax Diesel
Section 5-B Fuel Lines
Fuel Suction Line for AirDog
®
II
5B-1. Insert the female quick connect end (see figure 23) of the “Suction Hose Assembly” into
the previously installed male fitting in the “Fuel In” port. A “click” will be heard when
the fitting is properly connected.
Figure 23
5B-2. Route the fuel line “Suction Hose Assembly” up along the frame back to the fuel tank
making sure not to kink or route the hose in such a manner where it can be damaged. Use
supplied tie straps to secure.
5B-3. Route and attach the female ½” SAE J2044 end (Figure 26) of the “Suction Hose
Assembly” to the male quick connect fitting shown in figure 25. You will hear a
“click” when properly connected.
Figure 25 Figure 26
5B-4 Any excess fuel hose can be addressed by routing the house in a fashion to take up
the extra length, or a section of the hose can be removed. Push lock splices have
been included if you choose to remove the excess hose.
Hose clamps are NOT required when using the hose splices.