PureFlow AirDog DF-200 - GM Duramax 2001-2010 - Manual (Page 6)

6
PureFlow AirDog
AirDog
®
II Demand Flow 2001-2010 DuraMax Diesel
Section 2 Installation & Safety Guidelines
AirDog
®
II
The installation of your AirDog
®
II can be made relatively easy by following the steps outlined
in this manual, and:
1. Inventory the package components completely. Notify PUREFLOW AIRDOG immediately
of any parts missing or damaged.
2. Read the installation manual completely. Understand how the system operates and
installation recommendations before beginning installation.
3. The installation recommendations contained herein are suggested installation guidelines only.
Individual installations may vary.
4. If any installation procedure is uncertain, contact PUREFLOW AIRDOG for technical
assistance.
5. When installing the AirDog® fuel lines be sure to keep the ORIGINAL ENGINE RETURN
LINE connected as it is from the factory!
SAFETY GUIDELINES!
CAUTION! Please be sure to chock the vehicle’s tires to prevent rolling.
CAUTION! Please use proper supports when working beneath an elevated vehicle.
CAUTION! Most diesel pickups have two (2) 12volt batteries. Disconnect the battery cables
to both batteries before proceeding with the AirDog II installation.
CAUTION! Vehicle frame rails should not be drilled into or welded upon.
CAUTION! Wear safety glasses when operating power tools such as drills and grinders or
when using a punch or chisel.
CAUTION! Use common sense when routing fuel lines and electrical harnesses. Keep them
away from hot exhaust components and/or moving parts. Properly secure lines to
prevent chaffing.
Use Good Judgment and Common Sense When Installing the AirDog
®
!