Mueller Snap Lock (MSL) - Manual (Page 34)

34
FLOATING EAVE
|
WOOD DECK
Installation Steps: (use only with fixed ridge/hip)
1. Install either eave trim or optional gutter onto the eave using #10 x 1 woodgrip pan head screws, 3 per 10'.
2. Apply butyl tape sealant to top leg of the eave trim or gutter as shown.
3. Install edge plate over butyl tape sealant using #10 x 1 woodgrip pan head screws, on 1’ centers.
4. Field notch, hem and fold the panel, then slide hemmed edge over edge plate as shown.
5. Attached clips as specified.
6. Seal the ends of the panel legs using tube sealant.
Wood Deck
Underlayment
Mueller Snap
Lock Sheet
Eave Trim
Clip
Edge Plate
#10 X 1" Pan
Head Woodgrip Screw
Sealant
Optional
Gutter