J.P. Instruments Fuel Scan 450M Pilots Guide - Manual (Page 28)

FS-450M Quick Reference Card
Filled Tanks
In flight do steps 1, 2, 3 first (on
power up skip to step 4)
1. Hold both STEP and AUTO
until you see:
immediately followed by:
2. Tap AUTO and see:
3. Tap STEP.
4. See:
immediately followed by:
5. Tap AUTO and see:
*
(with aux tanks or tabs, Tap
AUTO again and see:
*
6. Tap STEP to exit.
(* Your tank capacity)
Added or Removed Fuel
In flight do steps 1, 2, 3 first (on
power up skip to step 4)
1. Hold both STEP and AUTO
until you see:
immediately followed by:
2. Tap AUTO and see:
3. Tap STEP.
4. See:
immediately followed by:
5. Tap AUTO 2 or 3 times, see:
6. Tap STEP and see:
Hold AUTO to increase;
Tap AUTO to decrease.
7. Tap STEP to exit.