J.P. Instruments EDM 930 Primary Pilots Guide - Manual (Page 42)

For Your Safe Flight Page 37
Downloading Data from the EDM
Downloading is a simple process. Follow the steps below:
a. With the EDM powered up, plug the USB flash drive into the
EDM USB port.
b. Wait for the EDM display to show DOWNLOAD: NEW.
c. To download only the new data since the last download, tap the
STEP button.
d. To download all data in the EDM, tap the CHANGE button to
see DOWNLOAD: ALL, then tap STEP.
e. You will see a ‘progress indicator’ as the data is copied to the
USB flash drive. DO NOT INTERRUPT THIS PROCESS.
When the download is complete the display on the EDM will
show DONE and then return to normal operation.
f. Wait until the process is complete then remove the USB flash
drive from the USB connector.
Transferring data from the USB Flash Drive to a PC
To transfer your data from the USB flash drive to your PC, follow
these easy steps.
1. On your PC, start the EzTrends program.
2. Plug in the USB flash drive into an available USB port.
3. In EzTrends, select the Move and Plot Data from Memory Stick
option.
4. In the displayed list, find the USB flash drive and double click it.
5. Select the file you wish to plot and then select the flight in that file.
Refer to the EzTrends manual for details on how to use EzTrends.