AEM 30-3020M Water Methanol Failsafe Device - Manual

AEM Performance Electronics
2205 126 th Street Unit A, Hawthorne, CA. 90250
Phone: (310) 484-2322 Fax: (310) 484-0152
http://www.aemelectronics.com
Instruction Part Number: 10-3020 Rev 02
 2011 AEM Performance Electronics
Installation Instructions for P/N 30-3020
Water/Methanol Failsafe
(Injection Monitor)
WATER/METHANOL FAILSAFE PARTS LIST
This product is legal in California for racing vehicles only and should never be used on public
highways.
WARNING:
!
Completely read this instruction manual before attempting to install or use this
product! This installation is not for the electrically or mechanically challenged!
Use this system with EXTREME caution! Misuse of this system can damage your
engine!
If you are uncomfortable with anything about this, please refer the installation to
an AEM trained tuning shop or call 800-423-0046 for technical assistance. You
should also visit the AEM Performance Electronics Forum at
http://www.aemelectronics.com.
NOTE: AEM holds no responsibility for any engine damage that results from the
misuse of this product!
Qty P/N Description Qty P/N Description
1 35-3020 W/M Failsafe Gauge 1 35-8553W Faceplate 1000 White
1 35-2126 Flow Sensor with Fittings 1 35-8529S Silver Bezel
1 35-3411 8-Pin Power Harness 1 35-4302 Install Kit (6 Butt Connectors)
1 35-3418 4-Pin I/O Harness 1 35-8441 Rubber Band
1 35-3415 3-Pin Sensor Harness 1 10-3020 Inj Mon Instructions
1 35-3010 USB Cable 1 Faceplate Config Instructions
1 35-8552W Faceplate 500 White 1 Needle Removal Tool
1 35-8552B Faceplate 500 Black