AEM 30-3020M Water Methanol Failsafe Device User Manual
Page 6
Page 6
Gauge Configuration Tab
This is the section where the gauge backlighting is configured.
Live Gauge View
Backlighting Color
Option
Description
Color Scale
Adjustable RGB color levels; use to match gauge backlighting to OEM gauge backlighting color
Needle Intensity
Adjustable intensity level; use to select desired needle brightness
AEM Presets
Preset backlighting colors to match existing AEM analog gauges; seven color options are red,
white, violet, teal, green, blue and orange
Alarm Flash
Option
Description
Flash
Select visual output to occur when alarm is triggered; can flash gauge backlight only, flash
needle only, flash both backlight and needle alternately, or do nothing
Flash Speed
Select speed of flashing while alarm is triggered; flash slow or fast
Flow Range & Dimmer Max Brightness
Option
Description
Flow Range
Select 500 or 1000 cc/min; gauge face plate must match flow range selection - see additional
instructions for face plate removal information
Dimmer Max
Brightness
Select whether +12V or ground indicates maximum backlighting brightness