AEM 30-6610 Series 2 Plug & Play EMS - Manual

© 2010 Advanced Engine Management, Inc.
ADVANCED ENGINE MANAGEMENT INC.
2205 126 th Street Unit A Hawthorne, CA. 90250
Phone: (310) 484-2322 Fax: (310) 484-0152
http://www.aempower.com
Instruction Part Number: 10-6610
Page 1 of 14
Installation Instructions for:
EMS P/N 30-6610
95 Nissan 240SX S14 KA24DE (OBDI)
95-97 Nissan Sentra and 200SX B14 SR20DE & GA16DE (Except 97 1.6L)
95-96 Nissan Altima U13 KA24DE (Except 96 CA models)
94-96 Infiniti G20 P10 SR20DE
WARNING:
,! This installation is not for the tuning novice nor the PC illiterate!
Use this system with EXTREME caution! The AEM EMS System
allows for total flexibility in engine tuning. Misuse of this
product can destroy your engine! If you are not well versed in
engine dynamics and the tuning of management systems or are
not PC literate, please do not attempt the installation. Refer the
installation to a AEM trained tuning shop or call 800-423-0046
for technical assistance. You should also visit the AEM EMS
Tech Forum at http://www.aempower.com
NOTE: AEM holds no responsibility for any engine damage that
results from the misuse of this product!
This product is legal in California for racing vehicles only and should never
be used on public highways.
Note: Part number 30-6610 supercedes and replaces p/n 30-1610 and 30-1610U
Vehicle Series I EMS Series II EMS
1995 Nissan 240SX S14 KA24DE (OBDI) 1610/U 6610
1995-1997 Nissan Sentra B14 SR20DE/GA16DE (x/c ‘97 1.6L) 1610/U 6610
1995-1997 200SX B14 SR20DE/GA16DE(x/c ‘97 1.6L) 1610/U 6610
1995-1996 Nissan Altima U13 KA24DE (x/c ’96 CA models) 1610/U 6610
1994-1996 Infiniti G20 P10 SR20DE 1610/U 6610