AEM Infinity Supported Applications - Toyota 1993-1997 Supra Turbo - Manual (Page 9)

Infinity Supported Application 9
© 2014 AEM Performance Electronics
ECU COVER MODIFICATIONS
It is recommend that the OEM ECU cover panel be modified and reinstalled with the AEM Infinity EMS
when utilizing the mounting bracket. Failure to properly clearance and reinstall this panel (Toyota
PN#55199-14020) could potentially result in damage to the ECU, adapter harness, ECU connectors and/
or USB cables and connectors.
Please note clearance modifications below. These modifications should be performed with a die grinder,
90-degree sander, or plastic shears.
Step 1: Remove the four ribs located near the center of the cover as highlighted below.
Step 2: Trim the center support leg as outlined. Test fit, note, and trim any additional areas required.