JB Conversions 16-1205 HD Standard Length SYE Kit Using OEM Housing - Manual (Page 9)

9
FIG: 13
15) The synchro hub ring may stay in the case with the mode fork as
the mainshaft is removed. If this happens, be sure to notice the top
and bottom orientation of the ring. Remove the mode fork and ring. It
is possible to reinstall this ring incorrectly causing malfunction (Fig.14,
14A).
FIG: 14 FIG: 14A
16) Remove the retaining ring holding the main drive sprocket
assembly in place. Remove the sprocket assembly from the shaft
(Fig.15).