Apple MacBook (13-inch, Late 2006) - Manual (Page 11)

Chapter 1 Ready, Set Up, Go 11
Note: When you first connect the power adapter to your MacBook, an indicator light
on the MagSafe connector starts to glow. An amber light indicates that power is going
to the battery. A green light indicates that no power is going to the battery, which can
mean the battery is fully charged or is not installed. If you don’t see a light, make sure
the connector is seated properly.
Step 2: To access the Internet or a network, connect one end of an Ethernet cable
to your MacBook and the other end to a cable modem, DSL modem, or network.
To use a dial-up connection, you need the external Apple USB Modem, available for
purchase from the online Apple Store at www.apple.com/store or from an Apple
Authorized Reseller. Plug the Apple USB Modem into a USB port on your MacBook, and
then connect a phone cord (not included) from the modem into a phone wall jack.
G
Ethernet
cable
Gigabit Ethernet port
(10/100/1000Base-T)