Boundless Technologies 4000 - Manual (Page 22)

Usage Notes 7
Usage Notes
The following notations and symbols are used in this manual:
þ
Ctrl-F1 : the two keys, Ctrl and F1 , are to be pressed simultaneously.
þ
Ctrl, F1 : the two keys, Ctrl and F1 , are to be pressed in succession.
þ
1-num or 1-alph : specifies that the number must be generated either from the
numeric or alphanumeric keypads.
þ
23h : the number 23 is represented in hexadecimal (hex) notation.
þ applies only to the PC+ keyboard.
þ applies to ASCII emulations only: ADDS-VP, Wyse 50+, Wyse 60, PC
Term, and TVI-925.
Unless specifically stated, this guide is written from the perspective that an ASCII
keyboard is attached to the terminal.