Boundless Technologies 4000 - Manual (Page 42)

AUXiliary/COMMunications Menu (Sess 2 - AUX) 27
Aux Echo [Yes, No]
When Yes is selected in this field, data received from the serial auxiliary device will be
displayed on the terminal screen. (This is only available in single host mode.)
Pace [00]
Enables user to preset a delay between characters during transmission. Select from
values of 0 to 99. Use right arrow to increase value and left arrow to decrease value.
This is useful if characters are lost when pressing function keys.
Terminator [US/CR, CRLF/ETX]
This field sets the end of line/end of page characters for block mode.
XPC [ Off , On]
Sets data flow control for PC Term Operation. This option modifies the Xon/Xoff
characters.