Ignition transmission lock check, Automatic transmission shift, Lock control function check -26 – Buick 2011 Regal User Manual

Page 262: Ignition transmission lock, Check -26, 26 vehicle care

Advertising
background image

10-26

Vehicle Care

3. For automatic transmission

vehicles, try to start the engine
in each gear. The vehicle should
start only in P (Park) or
N (Neutral). If the vehicle starts
in any other position, contact
your dealer for service.

For manual transmission
vehicles, put the shift lever in
Neutral, push the clutch pedal
down halfway, and try to start
the engine. The vehicle should
start only when the clutch pedal
is pushed down all the way to
the floor. If the vehicle starts
when the clutch pedal is not
pushed all the way down,
contact your dealer for service.

Automatic Transmission
Shift Lock Control
Function Check

{

WARNING

When you are doing this
inspection, the vehicle could
move suddenly. If the vehicle
moves, you or others could be
injured.

1. Before starting this check, be

sure there is enough room
around the vehicle. It should be
parked on a level surface.

2. Firmly apply the parking brake.

See Parking Brake on
page 9‑29
.

Be ready to apply the regular
brake immediately if the vehicle
begins to move.

3. With the engine off, turn the

ignition to ON/RUN, but do not
start the engine. Without
applying the regular brake, try to
move the shift lever out of
P (Park) with normal effort. If the
shift lever moves out of P (Park),
contact your dealer for service.

Ignition Transmission
Lock Check

While parked, and with the parking
brake set, try to turn the ignition to
LOCK/OFF in each shift lever
position.

.

The ignition should turn to
LOCK/OFF only when the shift
lever is in P (Park).

.

The ignition key should come
out only in LOCK/OFF.

Contact your dealer if service is
required.

Advertising