Getting ready 142, Installing the card 142, Getting ready – Apple PowerBook (5300 Series) User Manual
Page 153
Advertising
Getting ready
You will need the RAM expansion card and a screwdriver with a Torx T-8
head. (Your card may come with a Torx T-8 screwdriver. If you need to
purchase a Torx T-8 screwdriver, you can probably find one at a hardware
or electronics supply store.)
IMPORTANT
No other type of screwdriver can be used to install the RAM card
in your Macintosh PowerBook.
Make sure you are installing a RAM card made for a Macintosh PowerBook
5300 series computer. The RAM card must use low-profile memory chips.
Connector
Low-profile memory chips
(The number and position of the chips on your
RAM card may differ from those shown.)
142
Appendix C
Advertising