Apple PowerBook (5300 Series) - Manual (Page 18)

If you are a new Macintosh PowerBook user, follow the instructions in the
rest of this section. If you have experience using a Macintosh computer, skip
to “Making Software Disks” later in this chapter to learn how to make floppy
disks of the software installed on your computer.
If you are a new Macintosh PowerBook user
If you have no experience using a Macintosh PowerBook computer, you need
to learn how to use your computer before you can make your disks. Follow
these steps:
1 Move your finger on the trackpad to move the arrow pointer ( 8 ) on the screen.
Place your index finger on the trackpad and your thumb on the trackpad
button. Don’t press the trackpad button yet.
2 Move your finger on the trackpad so that the tip of the arrow ( 8 ) is inside the Quit button
at the bottom of the Floppy Disk Maker box.
3 Being careful not to move your finger on the trackpad, press and release the trackpad
button.
The Floppy Disk Maker box no longer appears. Instead, you see the following
picture:
Note: Your screen should look very similar to this, but it may not look exactly
the same.
7 Getting Started