Apple Mac Pro (Mid 2010) User Manual
Page 50
Advertising
50
Chapter 3
Making a Good Thing Better
5
Open the ejectors on DIMM slots 1, 2, and 3 and push them out to the sides. Then
remove the DIMMs from the slots.
6
Install the DIMMs by aligning them in the DIMM slots and pushing both ends of the
DIMM down until the tabs are vertical and the ejectors snap into place.
NOTICE:
To avoid damaging the DIMM, hold it by the corners and don’t touch the
gold connectors or other components.
Ejectors
Notch
Connectors
Advertising