Apple Mac Pro (Mid 2010) - Manual (Page 62)

62 Chapter 3 Making a Good Thing Better
Installing Serial ATA Hard Disk Drives
Your Mac Pro can accommodate up to four internal 1-inch-high SATA hard disk drives
in the drive bays. If your Mac Pro comes with a single drive installed, it’s in the first drive
bay. You can install drives in the second, third, and fourth drive bays.
To install a hard disk drive:
1 Open your Mac Pro and remove the side panel following the instructions in “Opening
Your Mac Pro” on page 39.
2 Lift the latch to unlock the drive carriers.
Note: When the latch is down, the carriers are locked in the drive bays and can’t
be removed.
3 Pull the carrier out of the drive bay.
Drive carrier