MBW CG200 - Manual (Page 42)

40
CHECKING ENGINE COOLANT LEVEL:
DO NOT REMOVE RADIATOR CAP WHILE ENGINE IS WARM. WAIT UNTIL THE
ENGINE IS COOL. ROTATE THE CAP SLOWLY TO THE FIRST STOP AND REĆ
LEASE ALL PRESSURE BEFORE REMOVING THE CAP.
DO NOT POUR COOLANT INTO A HOT RADIATOR. THE CYLINDER HEAD OR
ENGINE BLOCK COULD BE DAMAGED.
1. Remove the radiator cap. Liquid level
must be 1/2" to 1" (13mm to 25mm)
below the bottom of the filler neck.
2. A 50/50 mixture of phosphate free anĆ
tifreeze and tap water.
3. Replace radiator cap and clean deĆ
bris from radiator.
4. Inspect hoses and connections for
leaks.
CHECKING BATTERY:
BATTERY GASES ARE EXPLOSIVE! KEEP CIGARETTES, SPARKS AND
FLAMES AWAY FROM THE BATTERY. BATTERY ACID IS A POISON AND CAN
CAUSE BURNS. PROTECT SKIN, EYES AND CLOTHING WHILE WORKING
AROUND THE BATTERY.
1. Remove battery cell caps.
2. The electrolyte should be 1/4" to 1/2"
(6mm to 12mm) above the plates. Do
not fill to bottom of filler neck.
3. Use only battery grade sulfuric acid
electrolyte of 1.265 specific gravity.
4. Install battery cell caps.