Baby Trend DELUXE TREND NURSERY CENTER 8207BCC - Manual (Page 5)

Figure 1
Figure 2
Figure 5
Figure 3
Figure 4
FOLDING PLAYARD
1. Undo the 3 hook and loop straps holding mattress from underneath
Playard floor. (If mattress is not used in the bassinet). Remove mattress
and set aside.
2. Grasp the center floor lock handle pushing down. Rotate the handle
counter-clockwise about 90 degrees and lift upward until handle is as
high as the top rails. Gather the four feet of the playard together so that
they nearly touch each other. See figures 1 and 2.
NOTE: TOP RAILS OF THE PLAYARD ARE STILL IN THE
“LOCKED” POSITION.
3. Locate release button on the center of the bottom of each top rail. Lift
slightly while squeezing button until the rail clicks. Push down on rail
(while still holding release button in) until side forms a “U”. Repeat for
remaining sides (Fig. 3).
NOTE: If top rail(s) do not form the “U” completely do not force. Check
the floor of your Playard to make sure all bottom rails are unlocked and
pull up on middle handle of floor again. Repeat step 3.
4. Pull up on handle in center of Playard (Fig. 4). Gather legs of
Playard together.
5. Wrap mattress around Playard frame with padded side facing in.
6. Secure the 3 hook and loop straps by feeding through loops on end of
mattress and folding back onto itself (Fig. 5).
7. Place Playard in carry bag so handle comes through opening
between zippers.
WARNING: NEVER LEAVE INFANT IN
PRODUCT WITH SIDES DOWN. Infant may
roll into space between pad and loose mesh
side causing suffocation.
Copyright © 2006 - 2007, Baby Trend Inc., All Rights Reserved.
5
Rotate before
lifting