Baby Trend DELUXE TREND NURSERY CENTER 8207BCC - Manual (Page 7)

NOTE: Playard MUST be in a locked set-up position before
installing and using the bassinet feature.
CONTENTS (Fig. 1):
1 Nylon bassinet insert
4 Metal support tubes 2 (male) (2 female)
ASSEMBLY
1. Insert the 2 female tubes into the two male tubes. (Fig. 2)
2. Insert the 2 assembled tubes through the loops provided on the
bassinet insert. (Fig. 3).
3. Place assembled bassinet onto the Playard. Push down each of the
bassinet supports onto the playard frame as shown in (Fig. 4).
NOTE: The printed warning label should be facing toward the
inside of the bassinet so that it is readable.
4. Place the Playard mattress into the bassinet with the padded side
facing up (Fig. 5).
5. Connect the canopy to the Playard frame as shown in (Fig. 6)
PLEASE NOTE THE CANOPY IS INTENDED FOR INDOOR
USE ONLY.
TO ASSEMBLE YOUR BASSINET
Figure 6.
Copyright © 2006 - 2007, Baby Trend Inc., All Rights Reserved.
7
Figure 1
Figure 2
Figure 3.
Figure 4. Figure 5.