Baby Trend DELUXE TREND NURSERY CENTER 8207BCC - Manual (Page 9)

Figure 5.
Figure 6. Figure 7. Figure 8.
NOTE: Short bar with connector knobs should be facing
inward.
5. Place connector knob prongs into holes located on corner pieces
of Playard (Fig. 5).
6. Turn connector knobs counter clockwise to lock (Fig. 6).
7. Flip changing area to inside of Playard (Fig.7).
8. Snap flap from changing area to side of Playard (Fig. 8).
9 Check that changing area is secure before using.
REMOVAL
1. Flip changing area to the outside of the Playard. Unsnap fabric flap
of changing area from Playard.
2. Twist connector knobs clockwise to unlock (Fig. 1).
3. Remove changing area from Playard (Fig. 2).
4. Disconnect the short bars from the curved bar by pressing on the
snap buttons and pulling apart. Remove curved bar from changing
area sleeve.
The changing area is now ready for storage.
Figure 1.
Figure 2.
REMOVAL AND FOLDING CHANGING AREA
Copyright © 2006 - 2007, Baby Trend Inc., All Rights Reserved.
9