2 commissioning – Lukas HP Cylinders User Manual
Page 14
14
7.2 Commissioning
If several cylinders are used simultaneously, the load should be distributed as evenly as
possible over all cylinders.
WRONG
RIGHT
Load
share 2
Load share 1 = Load share 2
Load
share 1
Load
share 1
Load
share 2
Load share 1 < Load share 2
If several cylinders are used simultaneously, the load should be lifted synchronously by
all cylinders.
WRONG
RIGHT
WARNING / CAUTION / ATTENTION!
Always keep a sufficient distance away from the hydraulic cylinder when
pressurising it, in particular when commissioning the equipment after
installation!
ATTENTION!
Each time before putting into operation, make sure that the hydraulic
connections to the cylinders are properly made and in full working order.
Incorrectly made connections or defective couplings can lead to a safety valve
responding (e.g. on the coupling nipple in the case of hoses with safety quick-
disconnect coupling nipple)!