Lukas HP Cylinders - Manual (Page 24)

24
11.3 Repairs
11.3.1 Couplings
The couplings must be replaced if:
- There is external damage,
- The lock does not function correctly,
- Hydraulic fluid continues to leak in a coupled/uncoupled state.
WARNING / CAUTION / ATTENTION!
Never repair couplings: they must be replaced with original LUKAS parts!
During assembly, tighten the coupling to the torque stated in the corresponding replacement
parts list for the cylinder.
Procedure:
1. Remove the coupling.
2. Position the new coupling and tighten it to the torque stated in the corresponding
replacement parts list for the cylinder.
11.3.2 Labels
All damaged and/or illegible labels (safety notices, type plate etc.) must be replaced.
Procedure:
1. Remove damaged and/or illegible labels.
2. Clean surfaces with industrial alcohol.
3. Affix new labels.
Ensure that you attach the labels in the correct position. If you are no longer sure about this,
please contact your authorised LUKAS dealer or LUKAS itself.