Lukas PO-4 - Manual (Page 10)

10
1 Motor unit with plastic hood 8 Remote control
2 Plastic oil tank 10 Connection taphole G 1/4
3 Pressure limiting valve 11 Thread G 1/4 for pressure gauge
4 Oil filler and venting screw 12 Connection board type NA - with
with gauge stick integrated 2/2-way valve
5 Carrying handle 13 Connection board type N3/N4
6 3-step switch 14 4/3 or 3/3-way valve
7 Power cable
Motor pump components
POA1_.TIF
POA1_1.TIF
fig. 10
LUKAS Hydraulik GmbH
A Unit of IDEX Corporation
Weinstraße 39, 91058 Erlangen
Postfach 2560, 91013 Erlangen • Germany
Tel.: +49 (0) 91 31/6 98-0 • Fax: +49 (0) 91 31/69 83 94
e-mail: [email protected]
PO4_e.P65 Subject to revision
© Copyright 1998 LUKAS Hydraulik GmbH