Synergy 5051 - Front 3 Link Kit for Jeep TJ - Manual (Page 16)

SYNERGY MFG. 870 INDUSTRIAL WAY, SAN LUIS OBISPO, CA (805) 242-0397
33. Cycle the suspension and double check that everything clears satisfactorily.
34. Remove the control arms, axle housing and weld:
• Weld the axle housing control arms and track bar mount
• Install the gussets and weld the frame track bar mount
• Weld the frame control arm brackets to the frame
• Remove the rod ends from the control arms and weld the tube bungs
• Remove the track bar bushing and rod ends and weld the bushing tube and
tube bung
35. Paint all components and reinstall, torque the 9/16 hardware to 150 ft-lb
36. Have the vehicle aligned by a professional shop. Check all hardware after 500 miles
of driving. We also recommend checking all hardware before and after all off road
trips to avoid failure from loose fasteners.