Synergy 5051 - Front 3 Link Kit for Jeep TJ - Manual (Page 2)

SYNERGY MFG. 870 INDUSTRIAL WAY, SAN LUIS OBISPO, CA (805) 242-0397
8. Cut off any suspension bracket on the frame that you will not be using, i.e. lower
control arm brackets, shock mount, spring mounts, track bar brackets, leaf spring
hangers, etc
9. Position and clamp the new front frame control arm brackets on the frame. The front
to back location is entirely up to you, on a TJ or YJ, the front tub body mount
generally is where it goes, but you can go as far back to the T-case skid plate. You
may need to relocate or push the brake, fuel lines above the frame control arm
bracket.