Synergy 5221 - 07-10 Jeep JK 2/4 Door Front Cage Kit User Manual
Page 10
Advertising
21. We will start by removing the sun visor, upper windshield trim, and lower windshield
trim.
The sun visors are secured with 2 small screws that can be
removed with a T20 torx bit. See image 21.1
Next, remove the small plastic screw and barb fitting in location 6
in image 21.2 below. Pull the upper trim down as there is a plastic
barb fitting which secures it to the roll cage.
Lastly, pull the lower A-pillar trim towards the back of the Jeep to
dislodge the clip from the windshield frame. See image 21.3
below.
Image 21.1
Image 21.2
Advertising