Synergy 5221 - 07-10 Jeep JK 2/4 Door Front Cage Kit User Manual
Page 16
Advertising
26. At this point we can remove the instrument cluster bezel. Pull the bezel towards the
steering wheel and away from the dash. There are clips securing it to the dash. Be
careful not to pull too hard as the clips can break.
27. With the cluster bezel off, remove the four 7mm bolts securing the cluster itself to the
dash. Disconnect all wiring which is plugged into the cluster. (**Note** There is no
need to label the plugs as they will only go back into the ports they came out of.)
28. On the underside of the dash, remove the 7mm bolt next to the OBD port.
Advertising