Synergy PPM-8055 - Manual (Page 3)

Detail view of track bar relocation bracket spacer installed
6. The anti-sway bar relocation bracket works in conjunction with the track bar
relocation bracket to raise the anti-sway bar mounts by 1.75”. This is required when
using the Synergy sway bar disconnect kit and/or using the Synergy Sway bar link
kit. If you are relocating the anti-sway bar link mounts refer to step 7 & 8. If you
want to keep the anti-sway bar links in the stock location, skip step 7&8 and refer to
step 9.
7. Install one of the 1.5” spacers between the stock sway bar tab and the side of the track
bar relocation bracket in the lower hole with a ½ x 3” bolt and top-lock nut; use a
washer under the bolt head and nut. Refer to the picture below for assembly
reference.