BenQ ESG-103 User Manual
Page 19
Chapter 3 Configuration - 15
3.3.2.2 DHCP Server Parameters
ESG103 can act as a DHCP server in your LAN side. It helps users to acquire
their IP addresses without making a lot of configuration. ESG-103 also offers
hosts parameters shown below.
Default Gateway - Tell hosts where they can deliver their packets if they
do not know how to deal with those packets. In fact, it
should be the ESG-103 itself.
Netmask - Tell hosts their netmask.
Name Server 1, 2, 3 - ESG-103 works as a DNS server to its hosts to help
hosts activate their DNS function. Since ESG-103
has DNS relay function, it offers hosts to be a
default name server.
DHCP Start IP - In ESG-103, there are 100 IP addresses at most can be
assigned to hosts. You can assign an IP address to the
host in this box from 192.168.1.1 to 192.168.1.253.
DHCP End IP - This field will be filled in automatically.