BenQ ESG-103 - Manual (Page 30)

Chapter 4 Appendix - 26
Appendix B:
TCP/IP Configuration for Windows 98/Me/2000
1. Click Start icon, and choose the settings, then click Control Panel.
2. Double click the Network icon. See the Configuration tab, and select
the TCP/IP line that has been associated to your network card.
3. Click Properties button to set the TCP/IP protocol of your ESG-103
gateway.
4. Please choose one setting method from a. Fixed IP address or b. DHCP.
a. Fixed IP setting:
i. Select Specify an IP address in the IP address tab. The default IP address
for ESG-103 is 192.168.1.1. According to the data, please fill in 192.168.1.
X (X is between 1 to 253) for IP address field and 255.255.255.0 for Sub-
net Mask filed.
ii. In the Gateway tab add the IP address of ESG-103 (default IP is
192.168.1.1) in the New Gateway field and click Add button.
iii. In the DNS configuration tab, please choose Enable DNS, fill in the
Host name, then add DNS values which are provided by your ISP into
DNS Server Search Order and click Add button.
iv. Restart your computer.
b.DHCP setting:
i. Select Obtain an IP address automatically in the IP address tab.
ii. Do not need to input values in Gateway tab.
iii. Choose Disable DNS in the DNS Configuration tab.
iv. Restart your computer.