Bel Canto Design PRe3 - Manual (Page 3)

The power supply on the PRe3 is preset
for the proper national voltage. The
power cable should have the correct
plug for your local power system. If you
believe this to not be true, please con-
tact your dealer immediately.
Warning !
Do not connect power to this
preamplifier yet!
This preamplifier, like any electrical com-
ponent, can be dangerous and cause
injury unless correct handling proce-
dures are observed and used. Before
powering this preamplifier it is neces-
sary to read and follow proper setup
and procedures.
page 4 © 2006 bel canto design, Ltd. PRe3 User’s Guide 0206 Rev. A
Unpacking your PRe3
Power Connection
PRe3 box contents include the following:
1 (one) - PRe3 Preamplifier
1 (one) - PRe3 User’s Guide
1 (one) - Power cord [6.6’ - 2 meters long]
1 (one) - Remote Control
1 (one) – Warranty Sheet
Carefully unpack each piece and check
for shipping damage. If there is any
damage, or if anything is missing,
please contact your dealer, distributor or
Bel Canto Design. IMPORTANT: Save all packing
materials as the packing is spe-
cially designed to protect the
unit during transportation or shipping. If
the packaging becomes lost or dam-
aged, please contact your dealer, dis-
tributor or Bel Canto before attempting
to transport your unit.