Bel Canto Design PRe3 - Manual (Page 9)

© 2006 bel canto design, Ltd.
PRe3 User’s Guide 0206 Rev. A
page 10
Bandwidth • DC-200KHz
Volume setting for unity gain • 80.0
Signal to Noise Ratio @ 2 Volt RMS • >105 dB A weighted, 20Hz-20kHz
Distortion @ 2 Volt RMS/1kHz • <0.001%
Dynamic Range • 120 dB
Input overload • 10 V RMS
Output Impedance • 500 Ohms Single Ended, 200 Ohms Balanced
Input Impedance • 10K Ohms Single Ended, 20K Ohms Balanced
Maximum Gain • 20dB/10X
Maximum Output Level • 9.5 V RMS
Idle power draw • 10 Watts
Power Requirements • 100-120 VAC 50-60 Hz or 220-240 VAC 50-60 Hz
Dimensions • 8.5” W x 12.5” D x 3” H (216 mm x 318 mm x 75 mm)
Weight: • 10lbs. (4.5 kg)
PRe3 Specifications