Breville recommends safety first, Important safeguards for all electrical appliances – Breville BEF400 User Manual

Page 3

Advertising
background image

5

Breville recommends safety first

We at Breville are very safety conscious. We design and manufacture consumer products with the safety of you,
our valued customer, foremost in mind. In addition, we ask that you exercise a degree of care when using any
electrical appliance and adhere to the following precautions:

Important safeguards for your Breville
BEF400 Avance Banquet Cookware

Carefully read all instructions before operating and
save for future reference.

Do not place Avance Banquet Cookware near the
edge of a bench or table during operation. Ensure
the surface is level, clean and free of water.

Remove any promotional stickers before using the
Avance Banquet Cookware for the first time.

Do not place the Avance Banquet Cookware on or
near a hot gas or electric burner, or where it could
touch a heated oven. Place frypan at least 20cm
away from walls and curtains.

Do not use on metal surfaces, for example, a sink
drain board.

Always insert Temperature Control Probe into
probe socket before inserting power plug into
power outlet and switching on appliance. Ensure
the probe socket is completely dry before inserting
the Temperature Control Probe.

To protect against electric shock, do not immerse
cord or Temperature Control Probe in water or any
other liquid.

Ensure the Temperature Control Probe has cooled
before removing from the appliance.

Always remove Temperature Control Probe before
cleaning the appliance.

If using plastic utensils, do not leave in frypan
when hot.

Never immerse cord and/or heat probe in water or
any other liquid.

Do not place hot glass lid under cold water.

Extreme caution must be used when the appliance
contains hot oil or other liquid. Do not move the
appliance during cooking. Allow the frypan to cool
before removing oil or other liquid.

Place frypan at least 200mm away from walls
and curtains.

Do not touch hot surfaces.

Do not leave the appliance unattended when in use.

Always turn the Temperature Control Probe to
‘MIN’, then switch off at the power outlet and
allow probe to cool, then remove probe and
unplug, if appliance is to be left unattended,
if not in use and before cleaning.

Keep the appliance clean. Follow the cleaning
instructions provided in this book.

Always use the appliance on a dry, level surface.

4

Important safeguards for
all electrical appliances

Unwind the cord before use.

Do not let the cord hang over the edge of a table
or counter, touch hot surfaces, or become knotted.

This appliance is not intended for use by young
children or infirm persons without supervision.

Young children should be supervised to ensure that
they do not play with the appliance.

It is recommended to inspect the appliance
regularly. Do not use the appliance if power supply
cord, plug, probe or appliance becomes damaged in
any way. Return the entire appliance to the nearest
authorised Breville Service Centre for examination
and/or repair.

Any maintenance other than cleaning should be
performed at an authorised Breville Service Centre.

This appliance is for household use only. Do not
use this appliance for other than its intended use.
Do not use in moving vehicles or boats. Do not
use outdoors.

The installation of a residual current device (safety
switch) is recommended to provide additional safety
protection when using electrical appliances. It is
advisable that a safety switch with a rated residual
operating current not exceeding 30mA be installed in
the electrical circuit supplying the appliance. See
your electrician for professional advice.

Do not place this appliance on or near a hot
gas or electric burner, or where it could touch
a heated oven.

Always switch appliance off, then switch off at the
power outlet, then unplug the appliance when not
in use, before attempting to move appliance and
before cleaning.

Advertising