Breville BEF400 - Manual (Page 4)

Glass lid
with adjustable steam vent
Large 38 x 25cm rectangular shaped frypan
Cast in butterfly element
with 2400 watts of power
Non-skid feet
Unique pull out utensil rest
Quick release removable base
Quantanium non-stick cooking surface
Extra deep 78mm pan
Variable temperature control
with 14 heat settings plus ‘High Sear’
Pan tilt lever
Cool touch integrated base and handles
Dishwasher safe
Operating your Breville Avance Banquet Cookware
7
Know your Breville Avance Banquet Cookware
6
Before first use
Remove any promotional materials and packaging
materials before use. Wash your frypan and lid in
hot soapy water. Rinse and dry thoroughly.
Do not immerse the cord, plug and/or Temperature
Control Probe in water or any other liquid.
1. Insert the Temperature Control Probe into the
probe socket on the appliance. Plug into a
230/240V power outlet and switch ‘On’. Always
insert the probe into the appliance first, then
insert plug into power outlet.
Before inserting the Temperature Control
Probe into the probe socket, ensure the interior
of the socket is completely dry. To do this, shake
out excess water then wipe the interior of the
socket with a dry cloth.
Note
2. Turn the dial on the Temperature Control Probe
anti-clockwise to the desired setting. The red
heating light on the probe will illuminate.
3. The red heating light will remain illuminated until
the frypan reaches the desired temperature. Once
the temperature has been reached, the red light
will cycle 'On' and ‘Off’ during cooking to
maintain the desired temperature.
4. When cooking is completed, turn the dial
clock-wise until it is aligned with the ‘MIN’.
Switch off at the power outlet and unplug.
5. Leave the Temperature Control Probe connected
to the appliance until cool.
This frypan must be used with the Temperature
Control Probe provided. Do not use any other
probe or connector.
Note