IKA EUROSTAR 100 control - Manual (Page 15)

15
micro B
micro A
USB micro B USB micro A
Connection capability: Wireless Controller to the EUROSTAR station:
Connection capability: EUROSTAR station to the computer:
A
USB micro B USB A
9-pin RS 232 9-pin RS 232
or
micro B
A
USB micro B USB A micro B
Maintenance and cleaning
The instrument is maintenance-free. It is only subject to the natural
wear and tear of components and their statistical failure rate.
Cleaning
For cleaning disconnect the main plug!
Use only cleaning agents which have been approved by IKA ® to
clean IKA ® instruments.
Dirt Cleaning agent
Dyes isopropyl alcohol
Construction materials water containing tenside/isopropyl alcohol
Cosmetics
water containing tenside/isopropyl alcohol
Foodstuffs water containing tenside
Fuels water containing tenside
For materials which are not listed, please request information from
IKA
® application support.
Wear protective gloves during cleaning the instruments.
Electrical instruments may not be placed in the cleansing agent for
the purpose of cleaning.
Do not allow moisture to get into the instrument when cleaning.
Before using another than the recommended method for cleaning
or decontamination, the user must ascertain with IKA
® that this
method does not destroy the instrument.
Spare parts order
When ordering spare parts, please give:
- machine type
- manufacturing number, see type plate
- item and designation of the spare part see www.ika.com,
spare parts diagram and spare parts list
- Software version.
Repair
Please send in instrument for repair only after it has been
cleaned and is free from any materials which may consti-
tute a health hazard.
For repair, please request the “Decontamination Certificate”
form IKA
® or use the download printout of it from IKA ® website:
www.ika.com.
If you require servicing, return the instrument in its original pack-
aging. Storage packaging is not sufficient. Please also use suitable
transport packaging.
or
A
9-pin RS 232 9-pin RS 232
USB micro B USB A
micro B