IKA EUROSTAR 100 control - Manual (Page 16)

16
Warranty
In accordance with IKA ® warranty conditions, the warranty period
is 24 months. For claims under the warranty please contact your
local dealer. You may also send the machine direct to our factory,
enclosing the delivery invoice and giving reasons for the claim. You
will be liable for freight costs.
The warranty does not cover worn out parts, nor does it apply
to faults resulting from improper use, insufficient care or mainte-
nance not carried out in accordance with the instructions in this
operating manual.
Error codes
The fault is shown by an error message in the display (C) as following if the error occurs, e.g. Error 4.
Proceed as follows in such cases:

Switch the device switch (A) off.
 Remove the stirrer tool and remove the instrument from the assembly.
 Reduce the speed and switch on (instrument switch (A)) the device without the stirrer tool.
Error Cause Effect Solution
Error 2 Motor current sensor fault motor off - Switch off the instrument
Error 3 Temperature inside instrument is too high motor off - Switch off the instrument and allow it to cool down
Error 4 Motor blockage or overload motor off - Switch off the instrument
- Decrease the load on the motor and restart again
Error 8 Speed sensor fault or overload motor off - Switch off the instrument
Error 21 Safety relay fault motor off - Switch off the instrument
If the actions described fails to resolve the fault or another error code is displayed then take one of the following steps:
- Contact the service department
- Send the instrument for repair, including a short description of the fault.
Accessories
R 2722 H-stand
R 2723 Telescopic stand
R 270
Cross sleeve
R 271 Cross sleeve
RH 5 Strap clamp
FK 1 Flexible coupling
R 301 Stirrer shaft protection
R 301.1 Support holder
R 60
Keyless chuck
PC 1.1 Cable
H 70 Extension cable
H 62.51 Stainless steel sensor
H 66.51 Stainless steel sensor, glass-coated
RB 1
Battery pack
OS 1.0 Power supply
USB cable micro A – micro B 2.0
USB cable A – micro B 2.0
R 1342 Propeller stirrer ≤ 2000
R 1345 Propeller stirrer ≤ 800
R 1381 Propeller stirrer ≤ 2000
R 1382 Propeller stirrer ≤ 2000
R 1389 Propeller stirrer, PTFE ≤ 800
R 1311 Turbine stirrer ≤ 2000
R 1312 Turbine stirrer ≤ 2000
R 1313 Turbine stirrer ≤ 800
Permitted IKA ® stirrer tools
max. speed
(rpm)
R 1300 Dissolver stirrer ≤ 2000
R 1302 Dissolver stirrer ≤ 1000
R 1303 Dissolver stirrer ≤ 2000
R 1352 Centrifugal stirrer ≤ 2000
R 1355 Centrifugal stirrer ≤ 800
R 1375 Paddle stirrer ≤ 800
R 1330 Anchor stirrer ≤ 1000
R 1331 Anchor stirrer ≤ 1000
max. speed
(rpm)