Eppendorf Innova 40R Shaker - Manual (Page 40)

Remote programming
New Brunswick Innova 40/40R Shaker
English (EN)
40
6.4 Program control commands
Code Meaning Command format Return data
PC Clear program
(clears program steps) PC<Space><Arg1><Space><Arg2><CR>
Note: If Arg2 is not included, all 15 steps of
selected program will be cleared. • Arg1 =
Program number
(1 – 4)
• Arg2 =
Step number
(1 – 15)
PM Program mode
(returns status of
current program run/
hold mode) PM<CR> • Arg1 =
Run/hold status
(0
= end, 1 = run)
• Arg2 =
Program number
(1 – 4)
• Arg3 =
Step number
(1 – 15)
Note: If a program has not
been selected to run, a 0 will
be returned for program
number and step number