Eppendorf Innova 40R Shaker - Manual (Page 41)

Remote programming
New Brunswick Innova 40/40R Shaker
English (EN)
41
PR Read program step in
memory PR<Space><Arg1><Space><Arg2><CR> • Arg1 =
Profile number
(1
– 4)
• Arg2 =
Step number
(1 – 15)
Note: if ARG2 = * (asterik) all
steps returned
• Arg9 =
Grow lamp
(0 = off, 1 = on)
• Arg8 =
UV lamp
(0 = off, 1 = on)
• Arg7 =
Step minutes
(0
– 59)
• Arg6 =
Step hours
(0
– 99)
• Arg5 =
CO
2
setpoint %
(future option, returns
0.0)
• Arg4 =
Speed setpoint
rpm
• Arg3 =
Temperature setpoint
°C
PS Program stop/start
(stops or starts a
program) PS<CR>
With no other parameters, any program
currently running will be stopped.
PS<Arg1><Space><Arg2><CR> • Arg1 =
Program number
(1 – 4)
• Arg2 =
Step number
(1 – 15)
Note: If Arg2 is not included,
the program will start in
Step
1.
Code Meaning Command format Return data