Eppendorf Innova 40R Shaker - Manual (Page 42)

Remote programming
New Brunswick Innova 40/40R Shaker
English (EN)
42
6.5 Report request commands
PW Write Program step to
memory PW<Space><Arg1><Space>...<Arg7><CR> • Arg1 = Program number
(1 – 4)
• Arg2 = Step number (1 –
15)
• Arg3 = Temperature
setpoint °C
• Arg4 = Speed setpoint
rpm
• Arg5 = CO
2
setpoint %
• Arg6 = Step (0 – 99)
• Arg7 = Step min (0 – 59)
Code Meaning Command
format Return data
RI Report software version RI<CR> • Arg1 = Display module software
version
• Arg2 = Control module software
version
RP Report parameter list (ASCII text header) RP<CR> • Arg1 = Speed rpm
• Arg2 = Temperature °C
• Arg3 = CO
2
%
RV Report measured values RV<CR> • Arg1 = Speed rpm
• Arg2 = Temperature °C
• Arg3 = CO
2
%
RS Report setpoint values RS<CR>
Code Meaning Command format Return data