Bose Lifestyle 20 - Manual (Page 10)

8 October 29, 2001 AM178934_09_V.pdf
English
Setting Up
Connecting the Acoustimass ® module power cord
1. On a dual voltage Acoustimass module, the voltage selector switch is preset at the
factory. Check to be sure it is set for the proper voltage (Figure 6). Use 115V for North
America, and 230V for Europe and Australia. In Europe, use the adapter plug provided. If
you are in doubt, contact your local electric utility for the appropriate voltage setting.
2. Plug the small end of the AC power (mains) cord into the module power jack.
Note: Do not plug the power cord into a power outlet until you complete all connections.
Connecting the music center power pack
The Lifestyle ® music center comes with a 100V, 120V, 230V, or 240V power pack. See
Figures 1 and 7. Dual voltage models include both the PS71 and PS72 power packs.
Use only the Bose ® power pack model specified for your area:
• Model PS71, 120V in North America • Model PS72, 230V in Europe
• Model PS73, 100V in Japan • Model PS74, 230V in UK or Singapore
• Model PS77, 240V in Australia
1. Firmly insert the small connector on the end of the AC power (mains) pack cable into the
AC POWER jack on the back of the Lifestyle ® music center.
2. Make sure that the power pack reaches an AC power (mains) outlet.
Note: Do not plug the power pack into a power outlet until you complete all connections.
Other connections
Use standard audio cables to connect other components to your Lifestyle ® music system,
matching the red connector to R (right), white (or black) connector to L (left).
Video components
To play video sound through your Lifestyle ® music system, connect the R and L fixed audio
outputs of your stereo VCR, stereo TV, or laserdisc player to the music center VIDEO 1 or 2
jacks. See Figure 8. You can use a Y-adapter (available at electronics stores) to connect a
mono source. However, the left and right speakers then play the same monaural sound.
Tape deck
To use an external tape recorder (analog audio cassette, analog open reel, digital audio
tape, Digital Compact Cassette, or MiniDisc), connect the inputs (REC) of the tape deck to
the music center TAPE OUT jacks. Connect the outputs (PLAY) from the tape deck to the
music center TAPE IN jacks. See Figure 8.
Additional CD player or changer
To use an external CD player or changer, connect the outputs from the component to the
music center AUX INPUT jacks. See Figure 8.
Turntable
To connect a turntable, you need a phono preamplifier (with RIAA equalization). Consult
your dealer for the appropriate model.
Note: The Lifestyle ® 20 music system cannot turn a connected component on or off.
230 V
115 V
Figure 6
Dual voltage Acoustimass module:
voltage selector switch settings
CAUTION:
Make sure the voltage selec-
tor switch is set correctly.
Figure 7
The AC power pack (model PS71
shown)
CAUTION:
Be sure to use the correct
power pack for your area.
Using the wrong one may
damage your music center.
L R
TAPE IN
L R
TAPE OUT
VCR, TV,
and/or
laserdisc
VCR, TV,
and/or
laserdisc
Other
component
Outputs Inputs
Tape
deck
Figure 8
Connecting other components