Using the system with external components, English operating your lifestyle, 20 music system – Bose Lifestyle 20 User Manual

Page 19: Turning the system on and selecting the component, Using a video sound source, Using a tape deck, Using headphones, Figure 23

Advertising
background image

AM178934_09_V.pdf

October 29, 2001

17

English

Operating Your Lifestyle

®

20 Music System

Using the system with external components

Follow the instructions on page 8 for connecting a component.

Turn on your component directly or by using its remote control. Use the VOLUME ▲ or ▼
key on the Lifestyle

®

remote control or music center to raise or lower the volume. Control all

other functions at the source, referring to its owner’s manual, if necessary. To begin, make
sure the component is turned on and a tape, CD, laserdisc, etc. is loaded.

Note:

The Lifestyle

®

20 music system cannot turn a connected component on or off.

Turning the system on and selecting the component

Press the TAPE, AUX, VIDEO 1, or VIDEO 2 key on the remote or press SOURCE SELECT
on the music center until the desired component is selected. This turns your music system
on and selects the component connected to that input. If the music system is already on,
this key selects the component.

The appropriate display indicator lights when the system is on and the component is
selected.

Using a video sound source

Press VIDEO 1 or VIDEO 2 on the remote or SOURCE SELECT on the music center until
VIDEO 1 or VIDEO 2 appears on the display. This turns your music system on and selects
the video sound source connected to the VIDEO 1 or VIDEO 2 jacks. If the music system is
already on, this key selects the component.

If your video component is connected to the music center AUX or TAPE jacks, press AUX or
TAPE on the remote or use SOURCE SELECT on the music center to select the component.

Using a tape deck

To record to a connected tape deck, play the source (AM/FM, CD, AUX, VIDEO 1 or 2) you
want to tape. In a 2-zone system, play the source in zone 1. Set the tape deck to record.

Using headphones

For headphone listening, use the stereo mini headphones jack on the right side of the music
center (Figure 23). While this jack accepts most headphone models, you can get an adapter
at Bose

®

dealers and most electronics stores, if needed.

Connecting headphones silences the speakers connected to SPEAKER ZONE 1.

L

R

TAPE IN

L

R

TAPE OUT

Figure 23

Connecting headphones

CAUTION:
The magnetic field from the
Acoustimass

®

module is not

an immediate risk to your
video tapes, audio tapes, and
other magnetic media.
However, you should not store
tapes directly on or near the
Acoustimass module.

Advertising