Eppendorf Reference - Manual (Page 25)

96
Removing the seals
Fig. 2 – 6 on the following pages show you how to remove the seals. The numbers
shown are identical with the numbers in the Ordering information (page 94) and
the numbers of the parts on page 1 of this manual.
0.1 – 2.5 μL, 0.5 – 10 μL and 2 – 20 μL (Fig. 2)
Push the control button all the way down and pull
off the ejector sleeve (13).
Piston seal
The piston seal in the tip cone is exchanged by
replacing the entire tip cone (11).
Tighten the tip cone (see IV of this part).
B
A
C
11
13
Eppendorf Reference® – Part B – Maintenance