5 troubleshooting, 1 general errors, Troubleshooting 5.1 – Eppendorf TCA-3 Temperature Monitoring System User Manual
Page 39: General errors
Advertising
Troubleshooting
TCA-3 Temperature Monitoring System
English (EN)
39
5
Troubleshooting
5.1
General errors
Symptom/message Cause
Remedy
LINK LED does not
light up after
connecting
Ethernet port
• The port may not be connected
or active.
Verify the connection by removing the
cable from the TCA-3 monitoring
system, then plug it into a computer
to ensure that the Ethernet port is
active.
Advertising