Mobilfluid 424 specs -5, Exxon univis hvi 26 specs -5 – JLG 601S Operator Manual User Manual
Page 79
SECTION 6 - GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
3121218
– JLG Lift –
6-5
Aside from JLG recommendations, it is not advisable to mix oils
of different brands or types, as they may not contain the same
required additives or be of comparable viscosities. If use of
hydraulic oil other than Mobilfluid 424 is desired, contact JLG
Industries for proper recommendations.
Table 6-8. Mobilfluid 424 Specs
SAE Grade
10W30
Gravity, API
29.0
Density, Lb/Gal. 60°F
7.35
Pour Point, Max
-46°F (-43°C)
Flash Point, Min.
442°F (228°C)
Viscosity
Brookfield, cP at -18°C
2700
at 40° C
55 cSt
at 100° C
9.3 cSt
Viscosity Index
152
Table 6-9. Exxon Univis HVI 26 Specs
Specific Gravity
32.1
Pour Point
-76°F (-60°C)
Flash Point
217°F (103°C)
Viscosity
at 40° C
25.8 cSt
at 100° C
9.3 cSt
Viscosity Index
376
NOTE:
Mobil/Exxon recommends that this oil be checked
on a yearly basis for viscosity.