BURY CC 9060 Music USER Manual - Manual (Page 10)

10
Installation of the hands-free car kit
Attention:
If you also connect the blue cable to clamp 30 (steady X
positive), the HFCK will be permanently supplied with
power. If the vehicle is not running for a longer period, this
could lead to a discharge of the car battery.
If you deviate from the specified connection descrip- X
tions it may be the case that certain functions on the HFCK
(e.g. the on-call duty) will not function correctly.
Installation instructions for the fuses
Please cut through the red, the black and the blue cable by means of a wire cutter or scissors. Now
insert the two endings of the red cable resulting from the cut into one of the binders, then close it. If
you hear two clicking noises, the clamp snapped in properly. Now insert one of the fuses and then
repeat the procedure with the other cables.