BURY CC 9060 Music USER Manual - Manual (Page 14)

14
Installation of the hands-free car kit
Connection 4 - Connection for System 9 basePlate compatible
with the CC 9060
This is where you connect the basePlate for the System 9. This base-
Plate is specially adapted for the electronics box of the HFCK. The
basePlate is supplied with power via the electronics box. You can char-
ge your mobile phone here and also leave it here for safekeeping.
Connection 5 - Phone-OUT
If you do not use the ISO-cable harness to play back the voice output
of the HFCK on the vehicle’s speakers, then you can connect, for exa-
mple, a separate BURY speaker or another adapted cable here. The
connection on the HFCK is suitable for a 3.5 mm sized mono jack. De-
pending on the type of car radio, the other connection is to be selected
separately.
Connection 6 - Microphone input
This is where you plug in the microphone jack. After connection 3 has
already been occupied use the rider. This ensures that neither of the
jacks is able to loosen as a result of vibrations.
Connection 7 - LINE-OUT
If you do not use the ISO-cable harness to play back the voice output
of the HFCK on the vehicle’s speakers, then you can connect, for exa-
mple, a different adapter cable here. The connection on the HFCK is
suitable for a 3.5 mm sized stereo jack. Depending on the type of car
radio, the other connection is to be selected separately.
Connection 8 - Monitor
Please plug the 9 pole plug of the monitor connection cable into this
jack. Tighten at least one of the two fixing screws hand-tight so that
this plug cannot become unplugged as a result of vibrations.
Connection 9 - Connection for additional accessories
Not currently available.
Connection 10 - for Apple iPod/iPhone
Please plug in the supplied cable (scope of supply no. 7) here. You can
connect an Apple product at the other end of it via the Apple Dock
Connector in order to play back music.